In-plane bending of a beam resting on a rigid rough foundation

Summary The bending of a finite-length beam that lies on a rigid, rough, flat foundation and interacts with it in accordance to the dry friction law is considered. Loading by bending moments applied at the ends of the beam is studied in detail. The problem is found to be a self-similar one. For small moments, the central part of the beam remains undeflected, and the problem reduces to the solution of an infinite system of algebraic equations. Large moments deflect the entire length of the beam, and the problem partly loses its self-similarity. In this case, the problem reduces to the solution of a successively decreasing number of ordinary differential equations along with some algebraical equations. The solution for the latter case provides initial conditions for the former one. This permits to obtain a solution for any value of the moment. Received 5 November 1996; accepted for publication 27 January 1997     

高品质激光尾波场电子加速器

激光尾波场电子加速的加速梯度相比于传统直线加速器高了3—4个量级,对于小型化粒子加速器与辐射源的研制具有重要的意义,成为当今国内外的研究热点.台式化辐射源应用需求的提高,特别是自由电子激光装置的快速发展,对电子束流品质提出了更高的要求,激光尾波场电子加速的束流品质和稳定性是目前实现新型辐射源的首要障碍.本文归纳整理了中国科学院上海光学精密机械研究所电子加速研究团队十年来在研制台式化激光尾波场电子加速器过程中采取的方案和取得的进展.例如率先提出了注入级和加速级分离的级联加速方案,通过实验获得了GeV量级的电子束能量;基于级联加速方式利用能量啁啾控制,实验获得世界最高品质的电子束流;通过优化激光系统稳定性和特殊的气体喷流结构,获得稳定的高品质电子束流输出等.这一系列实验结果有利于进一步推进激光尾波场电子加速器的应用.     

气体团簇离子束两步能量修形法的平坦化效应

本文提出采用气体团簇离子束的两步能量修形法来改善4H-SiC(1000)晶片表面形貌.先用15 keV的高能Ar团簇离子进行整体修形,再用5 keV的低能团簇离子优化表面.结果表明,在相同的团簇离子剂量下,与单一15 keV的高能团簇处理相比,两步法修形后的表面具有更低的均方根粗糙度,两者分别为1.05 nm和0.78 nm.本文还以原子级平坦表面为研究对象,揭示了载能团簇引起的半球形离子损伤(弧坑)与团簇能量的关系,及两步能量修形法在弧坑修复中的优势.在原子力显微镜表征的基础上,引入了二维功率谱密度函数,以直观全面地给出材料的表面形貌特征及其随波长(频率)的分布.结果表明,经任何能量的团簇离子轰击的表面,在0.05—0.20μm波长范围内,团簇轰击都能有效地降低粗糙度,而在0.02—0.05μm范围内,则出现了粗化效应,这是由于形成了半球形离子损伤,但第二步更低能量的团簇离子处理可以削弱这种粗化效应.     

High efficiency and broad bandwidth terahertz vortex beam generation based on ultra-thin transmission Pancharatnam–Berry metasurfaces

The terahertz(THz) vortex beam generators are designed and theoretically investigated based on single-layer ultra-thin transmission metasurfaces. Noncontinuous phase changes of metasurfaces are obtained by utilizing Pancharatnam–Berry phase elements, which possess different rotation angles and are arranged on two concentric rings centered on the origin.The circularly polarized incident THz beam could be turned into a cross-polarization transmission wave, and the orbital angular momentum(OAM) varies in value by lh. The l values change from ±1 to ±5, and the maximal cross-polarization conversion efficiency that could be achieved is 23%, which nearly reaches the theoretical limit of a single-layer structure.The frequency range of the designed vortex generator is from 1.2 THz to 1.9 THz, and the generated THz vortex beam could keep a high fidelity in the operating bandwidth. The propagation behavior of the emerged THz vortex beam is analyzed in detail. Our work offers a novel way of designing ultra-thin and single-layer vortex beam generators, which have low process complexity, high conversion efficiency and broad bandwidth.     

Growth of high-crystallinity uniform GaAs nanowire arrays by molecular beam epitaxy

The self-catalyzed growth of Ga As nanowires(NWs) on silicon(Si) is an effective way to achieve integration between group III–V elements and Si. High-crystallinity uniform Ga As NW arrays were grown by solid-source molecular beam epitaxy(MBE). In this paper, we describe systematic experiments which indicate that the substrate treatment is crucial to the highly crystalline and uniform growth of one-dimensional nanomaterials. The influence of natural oxidation time on the crystallinity and uniformity of Ga As NW arrays was investigated and is discussed in detail. The Ga As NW crystallinity and uniformity are maximized after 20 days of natural oxidation time. This work provides a new solution for producing high-crystallinity uniform III–V nanowire arrays on wafer-scale Si substrates. The highly crystalline uniform NW arrays are expected to be useful for NW-based optical interconnects and Si platform optoelectronic devices.     

连续梁在周期荷载下的动力稳定性简化分析方法

对于一般任意支撑的连续梁结构动力稳定性问题，已有的计算方法求解过程都很复杂，给工程设计带来极大的不便．本文提出了一个简化的分析方法，利用现有的商业软件，只需求得连续梁的自然频率及静力屈曲（失稳）荷载，就可容易得到结构的动力失稳区域，当考虑结构阻尼对不稳定区域的影响时，可将阻尼矩阵表达为Rayleigh阻尼的形式．研究结果表明：采用本文计算方法与已有的理论计算方法得到的连续梁主参数共振的不稳定边界非常吻合，而本文计算方法更为简单，计算结果可靠，计算精度高，可满足工程设计的需要．     

面向变厚度柔性轧制工艺的帽型梁横向冲击吸能优化设计

作为汽车主要吸能构件的帽型梁的吸能提升设计是备受关注的问题.研究表明,通过优化薄壁结构的厚度可有效提升吸能性能,但复杂的厚度分布造成制造困难.针对可实现厚度调控的工艺,发展易制造的结构设计方法极为必要.本文基于变厚度柔性轧制工艺(variable gauge rolling, VGR)可实现厚度调控的特点,发展建立帽型梁横向冲击吸能优化设计方法.基于变厚度柔性轧制工艺生产的柔性轧制板(tailor rolled blanks, TRB)的特点,将受横向冲击的帽型薄壁梁设计成沿轴线分段变厚度、分段间设梯度过渡段的结构形式,通过调整各段厚度、分段位置和过渡层梯度变化规律,实现性能的优化.以应变能密度分布均匀为优化准则、基于混合元胞自动机(hybird cellular automata, HCA)方法构建优化模型和求解方法,并在迭代过程中施加满足轧制约束的过滤函数,使结构满足轧制工艺要求.其中,轧制约束的过滤函数由粒子群算法自动寻找.基于本文方法,具体设计了柔性轧制帽型梁横向冲击吸能最优的分段位置、各段厚度及过渡段厚度的梯度过渡方式,设计结果验证了方法的有效性.      

主动控制压电旋转悬臂梁的参数振动稳定性分析

在工程实际中旋转机械由于制造和加工误差,装配的不均匀性等原因,往往会脉动运行,这将使得机械系统发生参数振动. 当脉动参数满足一定关系时,这种参数振动将会失稳,进而影响机械结构的正常运转. 本文针对这一问题,引入压电材料对 脉动旋转悬臂梁系统的振动进行控制,研究主动控制悬臂梁系统的参数振动优化设计问题,采用 Hamilton 变分原理与一阶 Galerkin 离散相结合的方法,建立了受速度反馈传感器主动控制的压电旋转悬臂梁的一阶近似线性控制方程. 运用多尺度方法,得到了压电旋转悬臂梁系统在发生1/2亚谐波参数共振时稳定性边界的控制方程,并利用直接分析方法验证了解析摄动解的正确性. 将摄动解中临界阻尼比和轮毂角速度脉动幅值的无量纲参数作为评价系统稳定性能的指标. 通过数值算例,分析了轮毂半径、轮毂角速度平均值和脉动幅值、梁长以及速度传感器的反馈增益系数对系统稳定性区域的影响. 研究结果表明,梁长、轮毂半径、脉动幅值会降低系统稳定性,反馈增益系数可以提高系统稳定性,而轮毂角速度平均值与系统稳定性之间有非单调的关系. 为进一步设计压电旋转机械结构提供了理论依据.